C528

From : GB7OMM @ GB7OMM.#34.GBR.EU

If you have got a Standard C520 or C528 but dont have the other bands then just
follow the insruction that are to follow:-

                EXPANDING RANGE OF STANDARD C520/C528
                ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

                   VHF  124.00-176.50Mhz  RX/TX
                   ~~~  327.00-399.99Mhz  RX

                   UHF  400.00-471.00Mhz  RX/TX
                   ~~~  820.00-899.99Mhz  RX
                        900.00-979.99Mhz  RX

1) TURN POWER ON.
2) PRESS VHF BUTTON.
3) PRESS FUNCTION THEN 0,D KEYS.
4) RELEASE FUNCTION.
5) PRESS UHF BUTTON.
6) PRESS AND  HOLD FUNCTION BUTTON  AND WHILE STILL  HOLDING FUNCTION PRESS THE
FOLLOWING KEYS...0,D,L,B,3,0,3,0,3,L.
7) TO STEP THROUGH UHF BANDS REPEATEDLY. ie 363,433,863,933 Mhz.
   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   PRESS FUNCTION BUTTON AND THEN 0,3 KEYS.

PLEASE NOTE I should not have to remind you that you are not to TX out of BAND.
~~~~~~~~~~~                                                     ~~        ~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The following commands will get your Hand held doing lots of other things..such
as:-

8) MINI REPEATER.
   ~~~~~~~~~~~~~~
   TO TURN INTO MINI REPEATER...
   PRESS FUNCTION BUTTON THEN 0,8 KEYS
   TO RETURN TO NORMAL....
   PRESS FUNCTION BUTTON THEN 0,8 KEYS

9) TO SET RECEIVER FOR DIRECT KEYBOARD/FREQUENCY DISPLAY.
   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   PRESS FUNCTION BUTTON THEN 0,4 KEYS.
10) TO MOVE DISPLAY IN 1Mhz STEPS.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    PRESS FUNCTION THEN 0,6 KEYS.

11) CLONING C520,C528 OVER THE AIR.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    THIS FUNCTION IS ONLY ENABLED IF THE MASTER C520,C528 HAS BEEN EXPANDED FOR
RX OR TX.
PRESS AND HOLD FUNCTION THEN 0,* THEN RELEASE FUNCTION.
PRESS PTT AND RELEASE THIS WILL SEND THE RX/TX DATA TO OTHER C520/C528 OVER THE
AIR.

12) SETTING BAND EDGES ON VHF/UHF RX/TX
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 PRESS AND HOLD  FUNCTION BUTTON.PRESS 0,0  THE DISPLAY WILL  CHANGE AND SHOW F
AND FOUR NUMBERS.
FIRST TWO SET THE LOWER FREQUENCY LARST TWO UPPER FREQUENCY.
TWO CHANGE THE LOWER AND UPPER FREQUENCY KEY IN 2764 THE DISPLAY WILL CHANGE TO
THE LOWEST FREQUENCY .ie 127 Mhz AND UPPER 164Mhz.

       G0OMM @ GB7UWS.