DIGICOM.2

========================================================
           TRACE SIDE VIEW
  :                                    :
  :                                    :
  :                      TO 2211       :
  :                         6/7        :
  :                    GND  ~          :
  :                      +  +          :
  :                      +  +          :
  :                  100K+  +          :
  :                B>-####-->+         :
  :                      +  +         +:
  :+           ++ >+++++++  / CUT TRACE:
  :+          +  E          /         +:
  :+  GROUND +       C>++++++    GND  +:
  :+++++++++++        +     +  ++++++++:
  .......... +  +  +  +  +  + .........:
           : *  *  *  *  *  * :
           : *  *  *  *  *  * :
           :=*==*==*==*==*==*=:
                                                                                
             1  2  3  4  5  6                                                   
                                                                                
1.CUT THE TRAC
E AS SHOWN  BETWEEN 6/7 2211 TO 4/6 EDGE CONNECTOR
                                                                                
2.ADD THE 2N3904 THIS WAY: COLLECTOR: TO 4/6 EDGE CONNECTOR
  OK TO MOUNt ON TRACE     EMITTER:   TO GROUND PIN 1 EDGE CONNECTOR
  SIDE.                    BASE:      IN SERIES WITH A 100K RESISTOR 
                           TO  PIN 6/7 OF 2211 CHIP
3. ADD .001 CAPS TO EDGE CONNECTOR PIN 3 TO GND
                                   PIN 5 TO GND
                                  PIN 4/6 TO GND
CONTINUED IN FILE DIGICOM.1