DJG1

Original from WB1ERG to KJ6FY@KJ6FY.#NOCAL.CA.USA.NA

To expand the rx on the Alinco DJ-G1 HT , Take the 5 screws off the back
cover slowly pull the cover away , make sure you do not pull quickly
because there is a ribbon cable attached... Once you have the cover
opened up , look for the Micro processer and the 2 loped RED and BLUE
wires , you cant miss them like all Alinco HT's..
Cut the RED wire and reset the microprocesser and you have expanded
your RX on 2 meters to 108 to 174 and on 440 you have expanded
it to 400 to 500 , I would think the Blue wire would expand the TX also
but i have not done this mode so am not sure but all Alinco HT's 
when you cut the Blue wire you extnd the TX... 

 very Nice HT , injoy..

 Steve -- WB1ERG



    ... Steve

        -------------------------------------------------------------
        -         Sams Callbook Database -- Ham Radio Mods          -
        -     =================================================     -
        -                         145.050                           -
        -------------------------------------------------------------