DR110.3

>From: Sake Brouwer <pe1jhq@pe1jhq.ampr.org>
Subject: 9600 baud mod for Alinco 110, 112, 1200 radios

Hello FELLOW Packeteers!  I just got off the phone with Matt from Alinco!
I have been asked if the 9600 baud Mod that I posted would also work fr the
110.  YES IT WILL!  The 110, 112 and 1200 radios are identical except for 
the power output of the 1200 (25-watts high power compared to the 45-watts of
the 110 and 112!) and the 112 has a LCD display to replace the piece of junk
one on the 110!  Also, if you want to have more power in the 1200, you can buy
the 100/112 PA Board (45-watts) for $65.00 from Alinco.  It also requires
buying 4 high power switching diodes for $20.00 from Alinco.  $85.00 for 
20-watts?...Doesn't sound like a good investment to me.  Don't forget the time
involved with doing this mod.  I discourage the use of HIGH POWER and have
posted bulletins on this subject!  Never the less, I feel obligated to pass
this info on to you, I am not the U.S. Government, I will NOT keep things
from you!  To follow is the 9600 baud Mod I received from Alinco.  Alinco
warns that the Warranty is void if this Mod is performed!  KA1BOY has been
great enough to try this Mod and says it works great for 1200 baud as well
as 9600 baud!  From all of us to you, THANK YOU BARRY!  One point to remember,
you will not be able to use the radio for voice.  This mod uses the Mic 
Connector...
                                 TRANSMITTER
1.  Remove R-31
2.  Remove C-40 (save this part, it is to be reused!)
3.  Connect one leg of C-40 to PIN 7 of the VCO Board
4.  Connect a jumper from the free leg of C-40 to the HOT end of C-35
              The MIC input is now connected DIRECTLY to the VCO!

CONTINUED IN DR110.4