mod for the alinco dr-110t
remove the top cover.
find the yellow wire at the front left corner (next to the tuning knob)
it makes a loop about 1 1/2 inches long.
clip the wire in two and insulate.
replace top cover.
reset the radio as per the manual. ( i.e.  hold f and vfo/m button down while turning the radio on.
to change bands, press funtion followed by mhz button.
rig will change bands each time you do so.
this should allow reception from 130 - 169.995 mhz
the rig will also transmit from 103 - 169.995 mhz


hope this will help
73's from don in cheyenne
n7myr @ n7jjy

From: N7MYR@N7JJY

JUST WANTED TO LET YOU KNOW ABOUT SOMETHING THAT THE MOD DOES,
THAT I DIDN'T KNOW AT FIRST....

130-170 RECEIVE AND XMIT
340-380 RECEIVE ONLY
870-890 RECEIVE ONLY

AFTER YOU MAKE THE MOD ON THE YELLOW WIRE, YOU RESET THE RIG AS PER
THE MOD. THEN TO GO FROM 130-170 TO 340-380, YOU HIT THE F AND MHZ
KEY. TO GO FROM 340-380, TO THE CELLULAR 870-890, YOU HIT THE F AND
MHZ KEY AGAIN. TO GO FROM 870-890 BACK TO 130-170, YOU HIT THE F AND
MHZ AGAIN.

PRETTY NEAT.

JUST THOUGHT THAT YOU MIGHT TO KNOW WHAT IT WILL DO......
BEST 73'S AND C U LATER...
DON
N7MYR @ N7JJY