Here is the chart of 2m/70cm HTs that I posted a few weeks ago. I got an Icom IC-24AT. I am done with the chart, but I will still do updates as time permits. If you have anything to add, just let me know. ================================================== Comparison chart of 2m/70cm dual-band HTs -- 26 Mar 1991 Radios included: Alinco DJ-560T, DJ-500T Kenwood TH-77A Icom IC-24AT,IC-32AT Yaesu FT-470, Reviewed in Sept 90 QST Radio DJ-560T DJ-500T TH-77A IC24-AT IC-32AT FT-470 ------------------------------------------------------ RxCov 136-165 138-174 138-174 130-180 438-450 440-450 440-450 430-450 RxSens 0.18 0.25 0.158 TxCov 140-150 140-150 144-148 440-450 440-450 430-450 FDX Yes Yes Yes Yes X-Band Yes Mod DualDsp Yes Yes No Yes CTCSS Yes Opt Yes Yes ToneSq Yes Opt Opt MemCh 40 20 42 40x2+2 20x2+2 19x2+2 DTMFmem 10x15 4x15 None 10x15 FacPwr 2.5 2.5 5W 2.3W PwrSet 2 4 2 2 Scan BM BSML BML BML Clock Yes No Saver Yes Yes Yes Yes APO Yes Yes No Yes MSR 629 629 576 RCUSA 380 464 HRO 400 519 474 AES 520 480 549 EEB 560 580 399 Acc Charg Charg Charg Case BeltClp BeltClp BeltClp Charger KbCov BeltClip Features: - Scan: B - band S - skip during band scan M - scan memory channels L - Lock out memory channels during scan - APO: Automatic power off - Saver: Battery saving monitor mode - Tone Sq: DTMF operated tone squelch - Mem Chan: channels x freq/channel + calling channels - FDX: Cross-band full duplex - X-Band: cross-band repeat - DualDisp: Dual frequency Display - FacPwr - Transmit ppower from factory, all of these units are 5W with 13.6V - PwrSet - Number of transmit power settings - MSR - Manufacturer's Suggested Retail - RCUSA - Radio Cebter USA - HRO - Ham Radio Outlet - AES - Amateur Electronics Supply - EEB - Electronic Equipment Bank Other features: The following information is based on things I have seen on the net and may not necessarily work. I have also put comments that don't fit in the chart in this section. - Kenwood TH-77A 2m section is modifiable for MARS/CAP can be modified for 118-165MHz Rx dual UHF receive - Icom IC-24AT A diode will extend UHF transmit range to 410-485 A diode will extend VHF transmit range to 138-168 Keyboard entry can enable 100-1000MHz Receive (diode has to be removed on older models). A diode can be removed to allow cross-band repeat Icom IC-32AT Simple mods for RX on 138-168 and 418-458. Tx on those ranges with a bit more work. - Yaesu 470 There is a mod for transmit on 140-174 Several people have mentioned that the backlit keyboard in a nice feature. Phil Benchoff benchoff@groupw.cns.vt.edu