FT736R.13

       8/ Repeat step 2,
          and Tune to the lowest Frequency in the PMS.
       9/ Repeat step 3.
      10/ Repeat step 4.
      11/ Keep Alternating between steps 3 & 4 until you get the
          Frequency down to 1000.000.0 MHz,
          becareful not to go over 1000.000.0 MHz,
          because the RIG will Automatically Default back to
          1040.000.0 MHZ,
          and you will have to start again from that point.
      12/ Repeat step 6.
      13/ Repeat step 1,
          By Pressing the Function KEY,
          Followed by the PMS KEY ( KEY 3 ).
      14/ Repeat step 2,
          Press the PMS KEY and Tune across the Two band edges,
          until you see 1999.999.9 MHz on your Digital Readout,
      15/ Now whilst still in the PMS press the VFO B Button.
      16/ Press the Magic Number of 9,2,4,9.
      17/ Repeat step 1.
      18/ Press the PMS KEY,
          But this time Press either of the UP or DOWN scan buttons,
          Your RIG will now scan between 1000.000.0 MHz and
          1999.999.9 MHz or 1999.999.9 MHz to 1000.000.0 MHz.

      As stated at the begining of this Modification the RIG will
      Receive from about 1215.000.0 MHz to around 1326.000.0 MHz.
      This Modification is for Receiving only,
      you can not use it to transmit outside your allowcated Frequency.

                           the End of Mod 4

      There are 3 more Mods for the FT736R,
      One for every Band that it will Receive on.

                           HERE IS THE LIST

      MOD 1. 144 TO 148 MHz - RPT plus Down MHz Button,
      the OFFSET is 01.999.9.

      MOD 2  430 TO 458 MHZ + RPT plus Up MHz Button,
      the OFFSET is 09.999.9.

      MOD 3.  46 TO  56 MHz + RPT plus Up MHz Button,
      the OFFSET is 01.999.9.
      
      MOD 4 1215 to 1326 MHz + RPT plus Up MHz Button,
      the OFFSET is 59.999.9.

      MOD 5 215 to 230 MHz + RPT plus Up MHz Button,
      the OFFSET is 05.999.9.

                               THE END









                                   PAGE 2