FT736R.18

                              STAGE 2

        Now that you have got so far it is Important that you
        follow the next few moves to the letter.

         1/ Press the Function Key Which is Marked with an ( F )
         2/ Press the PMS KEY ( KEY 3 ).

        You have just stored your New Band Edges in to the PMS,
        to check this out simply Press the PMS KEY,
        and Press either of the up or down Scan Buttons,
        you will find that the RIG will scan up or down either way,
        but that Depends on which Button was Pressed first.

        Now that you have 330.000.0 MHz in the PMS,
        Make sure that you have an OFFSET of 99.999.9. in the PMS,
        also Make sure that the Repeater Shift is in the + RPT position.

         3/ Tune to the Lowest Frequency in the PMS which should 
            Now be 330.000.0 MHz.
         4/ Press the REV KEY ( KEY 5 ).
         5/ Press the UP MHz Button.
         6/ Repeat Steps 5 & 6 Alternating Between both until
            you get your Digital Readout Down to 230.000.0 MHz.
         7/ Press the Magic Number of 9,2,4,9 in that order.
         8/ Press the F Key followed by the PMS key.
         9/ Press the PMS Key again,
            Now tune to the lowest Frequency in the PMS
            Which should now be 230.000.0 MHz.

        10/ Repeat Steps 5 & 6 Alternating Between both until you get
            the Frequency Down to 130.000.0 MHz
                                                     
        11/ Press the Magic Number of 9,2,4,9 in that order.
        12/ Press the F Key followed by the PMS Key.
        13/ Press the PMS KEY again,
            And Tune to the Lowest Frequency in the PMS,

        14/ Repeat Steps 5 & 6 Alternating until you get the
            Frequency down to 30.000.0 MHz.

        15/ Press the Magic Number of 9,2,4,9, in that order.

        16/ Press the F KEY followed by the PMS Key.

        17/ Press the PMS Key,
            Now Tune to the lowest Frequency in the PMS which 
            should now be 30.000.0 MHz

        18/ Repeat Steps 5 & 6 Alternating Between both until
            you get the Frequency down to 00.000.0 MHz,
            Be careful not to go Passed this Frequency,
            Because the RIG will automatically Default Back to
           30.000.0 MHz,
           And you will have to start again from that point.

        19/ Press the Magic Number of 9,2,4,9, in that order.

        20/ Press the F Key followed by the PMS Key.



                                   PAGE  2
CONT IN FT736R.19