IC10.3

                Down
                ____
DN;
                The Frequency or Memory Channel
                Will Decrement One Step


                Frequency VFO A / VFO B Request
                _______________________________
FA;
FB;
                The Frequency in the Selected VFO Will be Read

                The Frequency Will be Sent in the Form:
                 FAggmmmkkkhhh;   or
                 FBggmmmkkkhhh;
                        Where    gg = GHz. Value
                                mmm = MHz. Value
                                kkk = kHz. Value
                                hhh =  Hz. Value


                Frequency VFO A / VFO B Select
                ______________________________
FAggmmmkkkhhh;
FBggmmmkkkhhh;
                The VFO Selected Will be Set to the Frequency Defined
                        Where    gg = GHz. Value (May be sent As 00 or Spaces)
                                mmm = MHz. Value
                                kkk = kHz. Value
                                hhh =  Hz. Value


                Function Select
                _______________
FNn;
                The Function Defined Will be Selected
                        Where   n = 0 for VFO A
                                    1 for VFO B
                                    2 for MEMORY

                Identify Model Request
                ______________________
ID;
                The Model of the Radio Will be sent in the Form :
                 ID00n;
                        Where : n = 1 for a TS-940 (*)
                                n = 2 for a TS-811 (*)
                                n = 3 for a TS-711 (*)
                                n = 4 for a TS-440


                Read Information Request
                ________________________
IF;
                The Status Information Will be Sent in the Form :
                 IFggmmmkkkhhh     snnnzrx yytdfcp
                        Where   gg~~hhh = Value as defined in FA Command
                                      s = "+" or "-" Value of RIT/XIT
                                    nnn = Value of RIT/XIT (n.nn kHz.)
                                      z = "0"  (Not Used in TS-440)
                                      r = Value as defined in RT Command
                                      x = Value as defined in XT Command
                                     yy = Memory Channel No.
                                      t = 0 for Receive
                                          1 for Transmit
                                      d = Value as defined in MD Command
                                      f = Value as defined in FN Command  
                                      c = Value as defined in SC Command
                                      p = Value as defined in SP Command  

CONTINUED IN IC10.4