IC728.2

From: G7NNT@GB7HUL.#15.GBR.EU

==============================================================================
MODIFICATION ICOM IC728:   GENERAL COVERAGE TX
==============================================================================

OPEN UP THE RADIO AND LOCATE THE PLL BOARD, CUT DIODE D5.  THE BOARD SHOULD
BE LOCATED ON THE LEFT HAND SIDE AT THE REAR.  RESET THE CPU BY PRESSING
FUNCTION AND THE MW BUTTON TOGETHER WHILE TURNING THE RADIO OFF AND ON AGAIN. 
THAT WILL GIVE YOU TX COVERAGE FROM 1.6 TO 30MHZ!

PLEASE DONT TRANSMIT OUTSIDE OF YOU ALLOCATED FREQUENCY BAND AS THIS COULD
RESULT IN YOU LOSING YOUR LICENCE!  GOOD DX AND HAVE FUN!