TM321A

Date: Mon, 25 Sep 89 14:38:05 EDT
From: rfc@philabs.Philips.Com  (Robert Casey)
To: mbramwel@uwo.ca

TM321A Mars/cap mod
from WM8J  msgID 2846_wa2rkn

To give the TM321 tx coverage from (142 0r 143, don't remember which) to
151.995 mhz, remove the top cover.  Look for a loop of wire comming from the
display area (the board with the CPU) and going right back.  Cutting this wire
and then doing a CPU reset is all you need to do.  Takes about 2 minutes.
Be sure that the ends of the wire don't short to something.

73s

Note: I haven't tried this, proceed at your own risk!  WA2ISE