TM732.4

many of you have replied to me but yet i have not gotten your mail so i think i
will but the "unknown mods" out.all of us know that the 732 has 25 memories per
band, but did you also know that it is capable of holding 50 per band ... the
732 has a "memory
    recall" a storage center for memory try this program in a certain freq not
in memory 1. now turn your radio off and reprogram the cpu press d then 7 your
memory should be brought back ...now turn off the radio and reset the cpu and
then press d then 7
 your old memories should be brought back keep doing this syste to change
betweee
n the two memories and you know have 50 per band.

    tuern off you radio press CALL and hold it while you turn on your rig.
after the display gets to you for a while turn the rig off and turn it on while
holding  VFO this resets your vf0 memory and the display stops. 
   clip the green wire underneath the head wire cover and solder a jumper in
where r 19 is and youll get 134-174 tx/rx and 410-470tx/rx  but if you really
want the extra tx and rx jump everything but r19 this will let you cover
136-174tx 118-174 rx 
340-512 rx/tx BUT  and dont forget the BUT you repeater shift will now be set
as + or - 10 on 440 and + or -5.7 on 144.you will also lose automatic shifting
and any repeat mods 
 
800-1100 MHz Rx
  mount a short 22pf  capacitor insteof short circuting the  pattern allows
improvement of receving sensitivity.

cloning your rig with another 732. 
 cloning only works with aother 732 and you can do it either with a cloning
cabl of over the air  i will not reveal how to clone over the air as in the mod
it states " swith the power off hold the CALL AND BELL KEYS, CLonE will then be
displayed and
clonging over the air will start. HOWEVER !!!!!!!!!!!
 on ANY TM-732  there is NO BELL BUTTON!!!!!!!!!!!!!!!!
so i suggest you try it this way turn the power off hold F and MHz and turn the
POWER on the freq. should read CLonE set thee slave transciever(another 732 )
to the same proces connect the mic jacks with a cloning cable and press CALL on
air will display 
and the s meter will tell how much is left to be cloned 
-memory channel modes, the number of channels for each band and all memory
channel data are cloned
 paging answer back  

-- i made an error in the 50 mod part will you to recall the memory hold F and
C.SELL and turn the radio on after "erasing " it THEN DO THE D 7 .

steve KC6SDE@N0ARY